StarterkitMB91360

The Fujitsu MB91360 Evaluationboard is a stand-alone application board that makes it easy to evaluate and demonstrate almost all features of the MB91360G microcontroller series. Along with the supplied Windows-based development tools, it can be used as a system for user program developments. The board can be configured as a target for the MB91360G emulation-system or as a stand-alone evaluation board using the MB91F362G, MB91F365G, MB91F366G, MB91F367G, MB91F368G or MB91F369G.

Note: An optional power supply 9V-12V with center pin is GND (e.g.: PSU SNG12-24W) is required!

• Footprint QFP208 (0.5mm pitch) for MB91F362G (or emulation socket)
• headers for adapter-boards for MB91F365G-F369G
• 4MHz or 32 kHz crystal selectable
• DC Power-supply circuit (incl. testpins for Vcc, GND, power-LED and switch)
• 512kB external SRAM available for user code and data
• External 16550 UART (supports transfer-rates up to 115.2 kBaud)
• 22V10-PAL for various control functions
• Three Resets ("Monitor"=Flash monitor, "User"=external RAM, "Flash"=User Flash Area)
• Two MAX232 + DB9 (female) connectors for monitor and internal UART
• CAN tranceiver and DB9 (male) for internal CAN0
• External Interrupt 0 and 1 connected to buttons for user interaction
• Various jumpers for individual configuration
• 2x16 char LCD (on Port G)
• Eight LEDs (on Port J)
• External bus and all resources logically grouped on pin-headers
• Area for extensions (2.54mm grid)
• Standard Euro-format (16x20 cm)
• Stand-alone version features built-in monitor debugger (in Flash)
• Software projects for various applications