SK-FM3-100PMC

Supports MB9B500 Series

The SK-FM3-100PMC is a multifunctional evaluation board for the Fujitsu microcontroller of the MB9B100, MB9B300, MB9B400 and MB9B500 Series.

The board allows the designer immediately to start software development before his own final target system is available.

Contents of the kit:

The SK-FM3-100PMC is a multifunctional evaluation board for the Fujitsu microcontroller of the MB9B100, MB9B300, MB9B400 and MB9B500 Series.
8-12V unregulated external DC power supply
On-board 5.0V and 3.3V voltage regulator
Power-LED
Two 7-Segment LED-Displays
Reset button, Reset LED
Two user buttons
In-Circuit Flash programming (UART, USB, JTAG)
All MCU pins routed to edge connectors
All resources available for evaluation
4 MHz main crystal
RS232 interface (SUB-D9 connector)
USB to serial converter (Type-B connector)
CAN interface (SUB-D9 connector)
USB Host (Type-A) and Device (Type-B) connectors
JTAG and ETM interface
RoHS compliant
CE conform

Template project for MB9BF506N	mb9bf506n_template-v12.zip
A simple digital voltage meter (DVM) is realized by this project using ADC AN00.	mb9bfxxx_adc_dvm-v11.zip
This example shows functionality of the CAN-controller (CAN0). It is controlled by a terminal on UART0.	mb9bfxxx_can_uart_terminal-v11.zip
A decimal up/down counter ist realized by controling two 7-segment displays via GPIO ports.	mb9bfxxx_ioport_counter-v11.zip
Usage of Multifunction Serial Interface 0 as UART	mb9bfxxx_mfs0_uart-v11.zip
Usage of Multifunction Serial Interface 0 as UART with interrupts	mb9bfxxx_mfs0_uart_irq-v11.zip
Usage of Multifunction Serial Interfaces 1 and 2 as CSIO with result output on MFS0 as UART	mb9bfxxx_mfs1_mfs2_csio_master_slave-v11.zip
How to communicate with an external SPI EEPROM (93C46)	mb9bfxxx_mfs3_csio_spi-v11.zip
How to communicate with an external I2C EEPROM (24C16)	mb9bfxxx_mfs3_i2c-v11.zip
USB-driver V1.0 for Win2000, WinXp, Vista and Windows 7	sk-fm3-100pmc_usb_win2000_xp_vista_windows7_v10.zip