SK-96380-120PMT
Supports MB96380 Series
DESCRIPTION
The SK-96380-120PMT is a multifunctional evaluation board for the Fujitsu 16FX Flash microcontroller series MB96F38x.
It can be used stand-alone for software development and testing or as a simple target board to work with the emulator system.
The board allows the designer immediately to start software development before his own final target system is available.
Note: An optional power supply 9V-12V with center pin is GND (e.g.: PSU SNG12-24W) is required!
FEATURES
- Supports Fujitsu’s MB96387-LQFP(M21) MCU in 120-PMT package or the MB2198 Emulator System with the Probe Cable MB2198-16FX-120P-M21
- 9-15V unregulated external DC power supply
- 5V, 3.3V, 2.5V and 1.8V onboard switching mode voltage regulators
- Power-LEDs for all supply voltages
- Onboard voltage supervisor monitors three of four supply voltages
- In-Circuit serial Flash programming (UART0 or UART1)
- All resources available for evaluation
- All MCU pins routed to connectors
- 4 MHz main-crystal
- 32 kHz crystal for sub clock operation
- 2 RS232- or LIN interfaces and 2 CAN interfaces are usable simultaneously
- 3V capable CAN, LIN and RS232 transceivers
- 8 User LEDs
- optional: alphanumeric standard LC-Display connectable instead of LEDs
- Reset-Button, Reset-LED
- 5 User-buttons
DOCUMENTATION
| Manual | ug-960001-11-SK-96380-120PMT-V20.pdf |
| Schematic | SK-96380-120PMT_V10_schematic_V11.pdf |
| Package QFP 0.50mm (M21) | fpt-120p-m21.pdf |
