SK-96380-120PMC-GDC

The SK-96380-120PMC-GDC is a multifunctional evaluation board for the Fujitsu 16FX Flash microcontroller MB96380 Series (MB96F38x).

It can be used stand-alone for software development and testing or as a simple target board to work with the emulator system.

The board allows the designer immediately to start software development before his own final target system is available.

The SK-96380-120PMC-GDC includes external memory (FLASH, SRAM) and is designed for 3.3V operation only!

Note: An optional power supply 9V-12V with center pin is plus (e.g.: PSU SNG12-24W) is required!

Contents of the kit:

• Starterkit SK-96380-120PMC-GDC
• Userguide
• Schematic
• Micros DVD including the Softune Workbench Development Environment

• Supports Fujitsu’s 16FX MB96380 Series with 120 pin PMC / M21 package or the MB2198 Emulator System with the Probe Cable MB2198-16FX-120P-M21
• 9-15V unregulated external DC power supply
• On-board 3.3V switching mode voltage regulator
• Power-LEDs for all supply voltages
• Onboard voltage supervisor monitor
• In-Circuit serial Flash programming (UART0 or UART2)
• All resources available for evaluation
• All MCU pins routed to connectors
• 4 MHz main crystal
• 32 kHz crystal for sub clock operation
• Two RS232- or LIN interfaces
• Two CAN interfaces
• 3 V capable CAN, LIN, and RS232 transceivers
• 8 User LEDs
• Optional: alphanumeric standard LC-Display connectable instead of LEDs
• Reset button, Reset LED
• 5 User buttons
• 8 MByte FLASH
• 2 MByte SRAM
• Connector for Fujitsu Graphic-Controller boards (e.g.: CREMSON-STARTERKITLIME)
• External bus interface routed to 96 pin and 48 pin DIN 41612 (VG) connectors
• Power Supply: 5V, 3.3V, 2.5V and 1.8V