SK-91467R-176PMC
Supports MB91F467RA
DESCRIPTION
The SK-91467R-176PMC is a multifunctional evaluation board for the Fujitsu 32-bit Flash microcontroller series MB91460.
It can be used stand-alone for software development and testing or as a simple target board to work with the emulator system.
The board allows the designer immediately to start software development before his own final target system is available.
Note: An optional power supply 9V-12V with center pin is GND (e.g.: PSU SNG12-24W) is required!
FEATURES
- Supports Fujitsu's MB91F467R MCU in FPT-176P-M07 package or the MB2198 Emulator System with the Socket Adapter Board EMA-MB91F467R-NLS-176M07 or EMAMB91F467R-LS-176M07 and the Adapter Board EMA-MB91V460A-001
- 9-12 V unregulated external DC power supply
- 5 V, 3.3 V, 2.5 V and 1.8 V onboard voltage regulators
- Power-LEDs for all supply voltages
- Onboard voltage supervisor monitors both supply voltages
- In-Circuit serial Flash programming
- All resources available for evaluation
- All MCU pins routed to edge connectors
- 4 MHz main crystal
- 32 kHz crystal for sub clock operation
- Four RS232 or LIN and two CAN interface are usable simultaneously
- 3 V capable CAN, LIN and RS232 transceivers
- 8 User LEDs
- Reset button, Reset LED
- 5 User buttons
- 96+48-pin VG connectors featuring external bus signals, e.g. for graphic sub-board
- 4 MB Flash ROM, 2 MB SRAM and 8 MB SDRAM connected to external bus
DOCUMENTATION
| Manual | ug-910053-16-SK-91467R-176PMC.pdf |
| Schematic | SK-91F467R-176PMC_schematic_v11.pdf |
| Package LQFP 0.50mm (M08) | fpt-176p-m07.pdf |
