SK-91467C-144PMC

The SK-91467C-144PMC is a multifunctional evaluation board for the Fujitsu 32-bit Flash microcontroller series MB91460.

It can be used stand-alone for software development and testing or as a simple target board to work with the emulator system.

The board allows the designer immediately to start software development before his own final target system is available.

Note: An optional power supply 9V-12V with center pin is GND (e.g.: PSU SNG12-24W) is required!

• Supports Fujitsu's 91467BA MCU in LQFP144 package or the MB2198 Emulator System with the Socket Adapter Board EMA-MB91F467B-NLS-144M08 or EMA-MB91F467B-LS-144M08 and the Adapter Board EMA-MB91V460A-001
• 9-12 V unregulated external DC power supply
• 5 V, 3.3 V onboard voltage regulators
• Power-LEDs for all supply voltages
• Onboard voltage supervisor monitors both supply voltages
• In-Circuit serial Flash programming
• All resources available for evaluation
• All MCU pins routed to edge connectors
• 4 MHz main crystal
• 32 kHz crystal for sub clock operation
• two RS232, two LIN and two CAN interface are usable simultaneously
• 3 V capable CAN, LIN and RS232 transceivers
• 8 User LEDs
• optional: alphanumeric standard LC-Display connectable instead of LEDs
• Reset button, Reset LED
• 5 User buttons
• 96+48-pin VG connectors featuring external bus signals, e.g. for graphic sub-board
• 96-pin VG connector featuring supply voltage (VCC) for external circuits (max. output current: 50 mA)