SK-91464A-100PMC
Supports MB91F464A
DESCRIPTION
The SK-91464A-100PMC is a multifunctional evaluation board for the Fujitsu 32-bit Flash microcontroller series MB91460.
It can be used stand-alone for software development and testing or as a simple target board to work with the emulator system.
The board allows the designer immediately to start software development before his own final target system is available.
Note: An optional power supply 9V-12V with center pin is GND (e.g.: PSU SNG12-24W) is required!
FEATURES
- Supports Fujitsu’s MB91F464AA MCU in LQFP100 package or the MB2198 Emulator System with the Probe Cable MB91464A-NLS-100PMC
- 9-12V unregulated external DC power supply
- 5V and 3.3V onboard voltage regulators
- Power-LEDs for all supply voltages
- Onboard voltage supervisor monitors both supply voltages
- In-Circuit serial Flash programming (UART4)
- All resources available for evaluation
- All MCU pins routed to edge connectors
- 4 MHz main crystal
- 32 kHz crystal for sub clock operation
- Two RS232, two LIN and one CAN interface are usable simultaneously
- 3V capable CAN, LIN and RS232 transceivers
- 8 User LEDs
- optional: alphanumeric standard LC-Display connectable instead of LEDs
- Reset button, Reset LED
- 5 User buttons
- 96-pin VG connector featuring most MCU signals
DOCUMENTATION
| Manual | ug-910025-15-SK-91464A-100PMC.pdf |
| Schematic | SK-91464A-100PMC_schematic_v10.pdf |
| Package LQFP 0.50mm (M20) | fpt-100p-m20.pdf |
