Skip to main content

Fujitsu

Europe, Middle East and Africa

Change 

SK-16FX-100PMC

Supports MB96340 Series

This tool is phased out.

Please see replacement part(s):

 


SK-16FX-EUROSCOPE
   

PICTURE

Picture

Top of Page

DESCRIPTION

The SK-16FX-100PMC is a low-cost evaluation board based on the Fujitsu 16FX microcontroller series MB96340.

Note: An optional power supply 9V-12V with center pin is GND (e.g.: PSU SNG12-24W) is required!


Top of Page

FEATURES

The SK-16FX-100PMC board includes the following features:

  • 1x UART-Transceiver (SUB-D9 connector)
  • 1x USB to serial converter
  • 1x High-speed CAN-Transceiver (SUB-D9 connector)
  • 2x LED-Display (7-Segment)
  • 2x User-button
  • 1x Reset-button, Reset-LED
  • All 100 pins routed to pin-header
  • On-board 5V and 3V voltage regulators, Power-LED
  • USB power-supply (external power supply possible)

      • Note: Power supply requirements: 9V-12V with center pin is GND (e.g.: PSU SNG12-24W)

  • USB cable
  • Mini CD with documentation and software examples

Top of Page

DOCUMENTATION

User Guide ReadMe.pdf
Schematic SK-16FX-100PMC_v11_schematic_v10.pdf

Top of Page

SK-16FX-100PMC - SOFTWARE EXAMPLES

The following software is for demonstration purposes only. It is not fully tested, nor validated in order to fulfill its task under all circumstances. Therefore, this software or any part of it must only be used in an evaluation laboratory environment.

Please check the Disclaimer.

Use only the template-project as starting point for your application. Only the template-project will be updated in case of any change of the header files, startup code etc.!
Tool specific Software Examples
Template project for SK-16FX-100PMC. sk16fx100pmc_template-v11.zip
This example shows a simple voltage meter with SK-16FX-100PMC. sk16fx100pmc_adc_dvm-v11.zip
This example shows functionality of the CAN-controller (CAN0). It is controlled by a terminal on UART0. sk16fx100pmc_can_uart_terminal-v10.zip
This example shows a simple counter on the 7-segment display of SK-16FX-100PMC. sk16fx100pmc_counter-v11.zip
This example uses the UART of the SK-16FX-100PMC. sk16fx100pmc_uart-v12.zip
USB-driver V1.0 for Win2000, WinXp, Vista and Windows 7 sk16fx100pmc_usb_win2000_winxp_vista_windows7_v10.zip
USB-driver V1.1 for Win98 sk16fx100pmc_usb_win98_v11.zip

Top of Page