Phase3-Kit
Supports MB91265 Series
DESCRIPTION
The Phase3-Kit is an evaluation board specially designed for motor control based on the Fujitsu FR microcontroller MB91F267. The board allows the designer immediately to start with the software development before his own final target system is available.
FEATURES
- Microcontroller MB91F267N
- 1x UART-Transceiver (SUB-D9 connector)
- 1x high-speed CAN-Transceiver (5-pin header)
- 1x external watchdog MB3793-42
- 2x 'User'-button
- 1x 'Reset'-button, 'Reset'-LED
- All 64 pins routed to pin-header
- On-board 5V voltage regulator, 'Power'-LED
- Battery-supply (external power supply possible)
Note: Power supply requirements: 9V-12V with center pin is GND (e.g.: PSU SNG12-24W)
The Phase3-Kit contains
- Phase3-Kit evaluation board
- 4x Battery Mignon AA
- 1 page introductional flyer
- Mini CD with documentation and software examples
DOCUMENTATION
| Manual | Phase3-Kit_ReadMe_V12.pdf |
| Schematic | Phase3-Kit_schematic_V12.pdf |
SOFTWARE
| This is a project template for the MB91265 Series. | phase3kit_template-v14.zip |
| This is the delivery status example for Phase3_Kit V1.2 | phase3kit-v11.zip |
| This Example converts the Value at AN8 to a digital value with 8 Bit resolution. | phase3kit_adc-v11.zip |
| Character read from UART and send via CAN . | phase3kit_can_uart-v13.zip |
| This is an example project for external interrupts. | phase3kit_irq_ext-v12.zip |
| This is an example project for controlling an AC-inverter. | phase3kit_ocu_sinpwm-v12.zip |
| This is an example project for using PPG. | phase3kit_ppg-v11.zip |
| This example does a simple string output on UART0. | phase3kit_uart_async-v13.zip |
