FLEXRAY-FPGA-EVA-KIT-369

The FLEXRAY-FPGA-EVA-KIT-369 Evaluation board is a multifunctional Evaluation board for the Fujitsu 32-bit Flash microcontroller MB91F369G Series and Fujitsu FlexRay communication controller. It can be used standalone for software development and testing using Softune Workbench Monitor debugger or together with the emulator system. The DECOMSYS::COMMSTACK driver library allows an easy access to the FlexRay Communication Controller on the Main board. Pre-compiled examples frees the user form own developments and demonstrate the capabilities of FlexRay. However, with the configuration tool FlexConfig® the user can design its own communication matrix and generate the initialization code for the FlexRay Communication Controller (CHI files). The board enables the designer to start immediately with the Software before his own target system is available.

CPU-369 board:

• Supports MB91F369G series
• 2MB external Debugging RAM
• 4MHz crystal
• DC Power supply circuit (incl. Test pins for VCC, GND, power LED and switch)
• 1 MB external Flash available for user code and constant data
• External Reset Button for MCU
• 2 Buttons for ext. Interrupt (USER_0 = ext. Interrupt0, USER_1 = ext. Interrupt1)
• MAX232 + DB9 (female) connector for internal UART
• CAN transceiver and DB9 (male) for internal CAN0
• 2 LEDs (on Port N)
• All peripheral pins are available by the connectors 'Peripheral_1' and 'Peripheral_2'
• Sub board support
• 96pin + 48pin VG connector
• RoHS compliant

FlexRay Main board

• DC Power-supply circuit for the entire system
• Supports FlexRay Controller FPGA and stand-alone version via Daughter Board 1 exchange
• RS485 Transceiver on the board (default)
• FlexRay transceiver via "Daughter Board 2"
• Terminal layout of Daughter board 2 has compatible terminal layout of "FlexPL Module TJA1080/UJA1081" manufactured by TZM
• 2 Channel carries the outside interface Dsub-9 (male) for FlexRay Bus
• External bus connector for the CPU Board Interface connection
• BUS Level Converter (3.3V-5.0V) that does the change of all the signals of External bus Connector
• All the pins (except for the power supply) of External bus connector are connected with Daughter Board 1
• Various jumpers for individual configuration
• The reset circuit between FlexRay Evaluation Board and CPU Board can be divided

FlexRay Evaluation daughter board

• Hosted on FlexRay Evaluation Main Board
• The interface of all the pins (except for the power supply) of External bus connector for CPU Board Interface is possible
• FPGA: ALTERA Device Stratix EP1S25F672C
• Hosted Configuration FLASHROM: ALTERA Device EPC16QC100
• Configuration FLASHROM can be written in via JTAG
• Various jumpers for individual configuration
• 16 LEDs on Main Board connected to FPGA
• 32 IOPORTs on Main Board connected to FPGA

The FLEXRAY-FPGA-EVA-KIT-369 Evaluation board comes with following parts:

• Cremson-Starterkit-CPU369 board
• FlexRay Evaluation board, FPGA based
• Power Supply
• Printed version of the user guide "Flexray-MB91369 Evaluation board"
• FLEXRAY-FPGA-EVA-KIT-369 Evaluation board CD-ROM
• Microcontroller CD3.6 or higher
• Addendum sheet with latest important instructions