FLASH-CAN-100P-M06

This report describes the basic features of the new FLASH-CAN-100-M06 board. This board can be used with almost all our 16LX microcontroller series supporting the FPT-100P-M06 package.

Note, this board must only be used for test applications in a laboratory environment.

The "Flash/CAN100"-board was developed, in order to support customers and allow a fast software design start. As you all know our emulators require a target system that provides Vcc and Gnd as well as an oscillation circuit. Additionally most of our flash microcontroller support the burn-in flash programming algorithm.

The new target board will be delivered with the MB90F598 single-CAN, 128KByte flash microcontroller. This microcontroller contains the 'burn-in'-boot loader for programming the flash. Please contact your nearest MCU support centre for flash-programming utilities and test software (e.g. OSEK-demo software). The flash-programming software allows to program a blank flash microcontroller.

Note: An optional power supply 9V-12V with center pin is GND (e.g.: PSU SNG12-24W) is required!

• New 100-pin socket adaptor for better connectivity
• 7-14V unstabilized external DC power supply possible
• 5V and 3.7V internal power supply available
• Two high-speed CAN drivers
• One RS232 interface
• Two identical pin connectors for all MCU pins
• Optional sub-clock
• RST, HST push-button
• 8 test LED
• External reset via RS232
• Supported Microcontroller Series:
• MB90420G : MB90V420G, MB90F428GA/GB/GC etc.
• MB90435 : MB90V540, MB90F437, MB90F438, MB90F439
• MB90440G : MB90V440G, MB90F443G etc.
• MB90470* : MB90F474L, MB90F474H etc.
• * modifications are necessary for FlashCAN100P-M06: see User Guide
• MB90480* : MB90V470, MB90V480, MB90F481, MB90F482, MB90F483
• * modifications are necessary for FlashCAN100P-M06: see User Guide
• MB90540G : MB90V540G, MB90F543G/GS, MB90F546G/GS etc.
• MB90550 : MB90V550, MB90F553A, MB90553A, etc.
• MB90580 : MB90V580, MB90F583, MB90583, etc.
• MB90590G : MB90V590G, MB90F594/A/G, MB90594/A/G, MB90591/G, etc.
• MB90595G : MB90V595, MB90F598/G, MB90598, etc.