CREMSON-STARTERKITCPU369
Supports MB91F369G
DESCRIPTION
The Fujitsu CPU-Modul is a low cost multifunctional evaluation board for Fujitsu 32-Bit Flash microcontroller that makes it easy to evaluate and demonstrate almost all features of the MB91F369 microcontroller. It can be used stand alone for software development and testing as a simple target board to work with the Softune Workbench monitor debugger system. The modular concept offers to connect directly one of several graphic device sub boards just by plugging them to the CPU boards. The CPU-board allows the designer immediately to start the software development before his own final target system is available.
Note: An optional power supply 9V-12V with center pin is GND (e.g.: PSU SNG12-24W) is required!
FEATURES
The Cremson-StarterkitCPU369 includes the following features
- MCU MB91F369G
- 2MB Debugging RAM
- 1 MB external Flash memory
- 4MHz crystal
- DC Power supply circuit (incl. test pins for VCC, GND, power LED and switch)
- Reset Button for MCU
- 2 Buttons for ext. Interrupt (USER_0 = ext. Interrupt0, USER_1 = ext. Interrupt1)
- MAX232 + DB9 (female) connector for internal UART
- CAN transceiver and DB9 (male) for internal CAN0
- 2 user LED (on Port N)
- All peripheral pins are available by the connectors 'Peripheral_1' and 'Peripheral_2'
- Graphic controller interface
DOCUMENTATION
| Manual | CREMSON-STARTERKIT-CPU369.pdf |
| Schematic | CPU-Schematics.pdf |
SOFTWARE
| This project is the base for your user-application. | ada_91362_91369_mondeb_template-v11.zip |
| This project shows the usage of the external interrupt 1. | ada_91362_91369_mondeb_ext_irq1-v11.zip |
| This project shows the usage of the reload timer. | ada_91362_91369_mondeb_rlt-v11.zip |
