Europe, Middle East and Africa
- Home
- > Services & Products
- > Semiconductor
- > Microcontrollers
- > 8-bit
- > MB95F284KPFGSNE1
MB95280 Series : MB95F284KPFGSNE1
SERIES KEY FEATURES
LPC
DESCRIPTION
Fujitsu MB95260/270/280 series of microcontrollers are 8-bit general purpose single-chip products providing precise on-chip oscillators, single-wire debug, clock supervisors, low voltage reset (option) as well as various peripherals for applications like air conditioner, remote controller, digital/pocket photographic materials, refrigerator, washing machine,electronic oven, etc. Very flexible composite timers offer functions such as pulse-width modulation (PWM), pulse-width counter (PWC), interval timer and input capture. Dual operation flash sectors together with a free of charge software API provide EEPROM functionality, thus saving external components and cost.
BLOCK DIAGRAM
MB95F284KPFGSNE1 - PRODUCT FEATURES
| CPU [Bits] | 8 |
| Package | FPT-16P-M06 |
| Pincount | 16 |
| Flash memory | 20.00 KByte |
| Flash Security (read protection) | yes |
| RAM (code & data) | 0.50 KByte |
| VCC min | 2.40 V |
| VCC max | 5.50 V |
| Min. Temperature | -40 °C |
| Max. Temperature | 85 °C |
| Max. CPU frequency | 16.25 MHz |
| Subclock | yes |
| Clock Supervisor | yes |
| Max. I/Os | 13 |
| A/D Converter | 1 |
| A/D channels | 5 |
| A/D resolution | 10 bit |
| LIN-USART | 1 |
| Programmable Pulse Generator (PPG) | 1 |
| Pulse Width Modulator (PWM) | 1 |
| Input Capture Unit (ICU) | 1 |
| Timebase Timer (TBT) | 1 |
| Watchdog | 1 |
| Low Voltage Detection (LVD) | yes |
| External IRQ | 6 |
MB95F284KPFGSNE1 - DOCUMENTATION
| Datasheet | ds95260h-ds07-12627-7e.pdf |
| Hardware Manual | hm95260h-cm26-10124-6e.pdf |
| Customer Information | CI704-00007-2v0-E_LIN_sysnc_mode_20101221.pdf |
| Package datasheet | fpt-16p-m06.pdf |
| Programming Manual | prog8fx-cm26-00301-2e.pdf |
| Product catalog: MB95200 Series | Catalog_95200.pdf |
MB95F284KPFGSNE1 - STARTERKITS
| Starterkit | MB2146-420-01-E |
| Power Supply Unit for Starterkit | POWERED BY USB |
MB95F284KPFGSNE1 - DEBUGGER and EMULATOR
| Emulation Main Unit | MB2146-08-E included in MB2146-420-01-E |
| Starterkit | MB2146-420-01-E |
| Power Supply Unit for Starterkit | POWERED BY USB |
APPLICATION NOTES
Please find a selection of Application Notes here or check the complete overview:
| This application note introduces the debug interface. | mcu-an-500016-e-v12 |
| This application note describes how to program a target board. | mcu-an-500017-e-v11 |
| This application note describes how to debug on a target board. | mcu-an-500018-e-v11 |
| This application note introduces the EEPROM library. | mcu-an-500019-e-v23 |
| This application note explains how to use a batch file for reading EEPROM content during debugging. | mcu-an-500021-e-v10 |
| This application note describes the API for Clock, CSV, Standby mode, Wild register, Interrupt and External Interrupt. | mcu-an-500022-e-v10Attachment |
| This application note describes the API for timebase timer, watchdog timer, watch prescaler and composite timer. | mcu-an-500023-e-v10Attachment |
| This application note describes the API for IO ports. | mcu-an-500024-e-v11Attachment |
| This application note describes the API for A/D converter. | mcu-an-500025-e-v10Attachment |
| This application note describes the API for the LIN UART. | mcu-an-500026-e-v10Attachment |
| This application note describes how to modify the MB95200 series starterkit for usage with MB95260 series MCU. | mcu-an-500027-e-v10 |
| This application note describes how to use the additional available MCU programmer adapter board. | mcu-an-500028-e-v14 |
| This application note describes how to implement a real-time clock based on the sub clock signal. | mcu-an-500029-e-v10Attachment |
| This application note describes how to drive a buzzer with the composite timer. | mcu-an-500031-e-v10Attachment |
| This application note describes how to calculate a CRC checksum by software. | mcu-an-500032-e-v10Attachment |
| This application note explains how to create a keyboard function using external interrupts. | mcu-an-500036-e-v10Attachment |
| This application note explains how to create a keyboard function using AD converter. | mcu-an-500037-e-v10Attachment |
| This application note explains how to create a keyboard function using matrix method with IO ports. | mcu-an-500038-e-v10Attachment |
| This application note shows how to wake-up MCU from standy mode by external key stroke. | mcu-an-500039-e-v11Attachment |
| This application note shows how to drive a 7segment led display via IO ports. | mcu-an-500040-e-v10Attachment |
| This application note explains the basic of a brushled DC motor (BLDC) and its control signals. | mcu-an-500043-e-v11 |
All application notes