MB91480 Series : MB91F487PMC
SERIES KEY FEATURES
3-phase motor control, 10 bit ADC, 32 bit MAC unit, Flash
DESCRIPTION
The Fujitsu MB91470/480 Series is designed for a wide range of applications requiring high performance, 3-phase motor control as well as high-speed signal processing.
BLOCK DIAGRAM
MB91F487PMC - PRODUCT FEATURES
| CPU [Bits] | 32 |
| Package | FPT-100P-M20 |
| Pincount | 100 |
| Flash memory | 512.00 KByte |
| RAM (code & data) | 4.00 KByte |
| Data RAM | 28.00 KByte |
| VCC min | 4.00 V |
| VCC max | 5.50 V |
| Min. Temperature | -40 °C |
| Max. Temperature | 85 °C |
| Max. CPU frequency | 80.00 MHz |
| DMA channels | 5 |
| Max. I/Os | 77 |
| A/D Converter | 3 |
| A/D channels | 18 |
| A/D resolution | 10 bit |
| A/D conversion time (min.) | 1.200 µs |
| UART | 3 |
| SIO (Serial I/O) | 3 |
| I2C | 3 |
| Programmable Pulse Generator (PPG) | 20 |
| Pulse Width Modulator (PWM) | 4 |
| Output Compare Unit (OCU) | 12 |
| Input Capture Unit (ICU) | 8 |
| Waveform Generator (WFG) | 12 |
| IOTimer | 6 |
| Reload Timer | 6 |
| Watchdog | 1 |
| External IRQ | 11 |
MB91F487PMC - DOCUMENTATION
| Datasheet | ds91470_480-ds07-16901-4e.pdf |
| Hardware Manual | hm91470_480-cm71-10134-4e.pdf |
| Hardware Manual Correction | hm91470_480-cm71-10134-4et3.pdf |
| Customer Information | CI-300015-E-MB91470_480_Multi_Function_Timer.pdf |
| Package datasheet | fpt-100p-m20.pdf |
| Instruction Manual | progfr-cm71-00101-5e.pdf |
MB91F487PMC - DEBUGGER and EMULATOR
| Monitor Debugger | Accemic-MDE |
| EVA-Chip EVA-Chip | MB91FV470-DSU4 |
| Emulation Main Unit | MB2198-01-E |
| DSU Cable | MB2198-10-E |
| Emulation Pod/Adapter | MB2198-160-E |
| Probe Cable | MB2198-162-E |
| Accessory Kit | ACCESSORIES32 |
MB91F487PMC - SOFTWARE EXAMPLES
The following software is for demonstration purposes only. It is not fully tested, nor validated in order to fulfill its task under all circumstances. Therefore, this software or any part of it must only be used in an evaluation laboratory environment.
MB91F487PMC - APPLICATION NOTES
Please find a selection of Application Notes here or check the complete overview:
| This application note will help you how to debug the application with Softune Workbench V6 Simulator. The simulator debugger simulates the MCU operations (executing instructions, memory space, I/O ports, interrupts, reset, etc.) with software to evaluate a program. | mcu-an-300103-e-v10 |
| This application note explains the usage of the 32-bit MAC-Unit of the MB91470/480 series. | mcu-an-300107-e-v10 |
| This application note explains the usage of the ADC units of the MB91470/480 series. | mcu-an-300108-e-v10 |
All application notes
