MB91350 Series : MB91F356BPMC
- Product Features
- Documentation
- Starterkits
- Debugger and Emulator
- (FLASH-)ROM Programming Tools
- Software Examples
- Application Notes
SERIES KEY FEATURES
Embedded control, 3.3V
DESCRIPTION
This series of single chip embedded flash microcontrollers includes the MB91F353 and MB91F355 devices for digital home appliances and other 3.3V embedded control applications.
BLOCK DIAGRAM
MB91F356BPMC - PRODUCT FEATURES
| CPU [Bits] | 32 |
| Package | FPT-176P-M07 |
| Pincount | 176 |
| Flash memory | 256.00 KByte |
| RAM (code & data) | 8.00 KByte |
| Data RAM | 16.00 KByte |
| VCC min | 3.00 V |
| VCC max | 3.60 V |
| Min. Temperature | 0 °C |
| Max. Temperature | 70 °C |
| Max. CPU frequency | 50.00 MHz |
| Subclock | yes |
| DMA channels | 5 |
| Max. I/Os | 126 |
| A/D Converter | 1 |
| A/D channels | 12 |
| A/D resolution | 10 bit |
| A/D conversion time (min.) | 1.480 µs |
| DAC channels | 3 |
| DAC resolution | 8 bit |
| UART | 5 |
| SIO (Serial I/O) | 3 |
| I2C | 1 |
| Pulse Width Modulator (PWM) | 6 |
| Output Compare Unit (OCU) | 8 |
| Input Capture Unit (ICU) | 4 |
| IOTimer | 1 |
| Reload Timer | 4 |
| Up/Down Counter | 4 |
| Timebase Timer (TBT) | 1 |
| Clock Timer | 1 |
| Watchdog | 1 |
| External Bus | yes |
| External Bus mode | MUX,NOMUX |
| Chip-Selects | 4 |
| External IRQ | 16 |
MB91F356BPMC - DOCUMENTATION
| Datasheet | ds91350a-ds07-16503-5e.pdf |
| Hardware Manual | hm91350-cm71-10121-3e.pdf |
| Hardware Manual Correction | hm91350-cm71-10121-3et3.pdf |
| Package datasheet | fpt-176p-m07.pdf |
| Instruction Manual | progfr-cm71-00101-5e.pdf |
MB91F356BPMC - STARTERKITS
| Starterkit | SK-91F355-176PMT |
MB91F356BPMC - DEBUGGER and EMULATOR
| EVA-Chip EVA-Chip | MB91V350APB-ES |
| Emulation Main Unit | MB2198-01-E |
| Emulation Pod/Adapter | MB2198-110-E |
| Probe Cable | MB2198-111-E |
| Socket | NQPACK176SD, HQPACK176SD |
| Accessory Kit | ACCESSORIES32 |
| Starterkit | SK-91F355-176PMT |
| Power Supply Unit for Starterkit | INCLUDED |
MB91F356BPMC - (FLASH-)ROM PROGRAMMING TOOLS
| Name | Type | Adapter |
| FLASH_PROGRAMMER_FR_FJ | serial (async) |
MB91F356BPMC - SOFTWARE EXAMPLES
The following software is for demonstration purposes only. It is not fully tested, nor validated in order to fulfill its task under all circumstances. Therefore, this software or any part of it must only be used in an evaluation laboratory environment.
| This is a project template for the MB91350 Series. | 91350_template-v13.zip |
| This Example will convert the voltage-value at AN0 (Pin 50) to a digital value with 8 Bit resolution. The result will be send via Uart0. | 91350_adc8_uart_async-v11.zip |
| This Example uses DMA Burstmode to transfer 16 kbyte of data from the external SRAM to the external FRAM. | 91350_extbus_dma-v10.zip |
| This Example uses external INT5 - to toggle LED D6 to LED LED D10 | 91350_irq_ext_v10.zip |
| The projects enables debugging the mcu replacing the internal Flash with external SRAM. This debugger has been modified to be used on the SK-91F355-176PMT. For this reason special settings have been done and must be considered in case of any modifications. | 91350_mondeb_uart0-v10.zip |
| ReloadTimer0 interrupt is used to toggle LED | 91350_rlt_v10.zip |
| This example does a simple string output on UART0 and UART3. | 91350_uart_async-v10.zip |
All software examples
MB91F356BPMC - APPLICATION NOTES
Please find a selection of Application Notes here or check the complete overview:
| This application note provides some information and recommendations how to connect external crystals or resonators to Fujitsu microcontrollers. In order to achieve a proper and stable clock oscillation the composition of external circuits, PCB layout design and the microcontroller must be taken into account and evaluated carefully | mcu-an-300007-e-v13 |
| This application note will help you how to debug the application with Softune Workbench V6 Simulator. The simulator debugger simulates the MCU operations (executing instructions, memory space, I/O ports, interrupts, reset, etc.) with software to evaluate a program. | mcu-an-300103-e-v10 |
| This Application Note describes how to setup the Softune Workbench to automatically start the debugger at start. | mcu-an-300097-e-v11 |
All application notes
