MB91270 Series : MB91F272WPFV
- Product Features
- Documentation
- Starterkits
- Debugger and Emulator
- (FLASH-)ROM Programming Tools
- Software Examples
- Application Notes
SERIES KEY FEATURES
CAN
DESCRIPTION
The FRLite series MB91270/280 (based on EVA device MB91V280) includes 100-pin devices (MB91270) and 144-pin devices (MB91280) for automotive body control and other 5V CAN applications.
BLOCK DIAGRAM
MB91F272WPFV - PRODUCT FEATURES
| CPU [Bits] | 32 |
| Package | FPT-100P-M05 |
| Pincount | 100 |
| Flash memory | 256.00 KByte |
| RAM (code & data) | 10.00 KByte |
| VCC min | 4.50 V |
| VCC max | 5.50 V |
| Min. Temperature | -40 °C |
| Max. Temperature | 85 °C |
| Max. CPU frequency | 32.00 MHz |
| Subclock | yes |
| DMA channels | 5 |
| Max. I/Os | 82 |
| A/D Converter | 1 |
| A/D channels | 24 |
| A/D resolution | 10 bit |
| LIN-USART | 7 |
| CAN | 1 |
| I2C | 3 |
| Programmable Pulse Generator (PPG) | 16 |
| Output Compare Unit (OCU) | 8 |
| Input Capture Unit (ICU) | 8 |
| IOTimer | 4 |
| Reload Timer | 3 |
| Up/Down Counter | 2 |
| Timebase Timer (TBT) | 1 |
| Real Time Clock (RTC) | yes |
| Watchdog | 1 |
| External Bus | yes |
| External Bus mode | Multiplexed |
| Chip-Selects | 4 |
| External IRQ | 16 |
MB91F272WPFV - DOCUMENTATION
| Datasheet | ds91270-ds07-16801-2e.pdf |
| Hardware Manual | hm91270_280-cm71-10128-2e.pdf |
| Hardware Manual Correction | hm91270-cm71-10128-2e-corr-x1-00.pdf |
| Customer Information | CI-300013-E-V12-C_CAN_Report.pdf |
| Package datasheet | fpt-100p-m05.pdf |
| Instruction Manual | progfr-cm71-00101-5e.pdf |
MB91F272WPFV - STARTERKITS
| Starterkit | Flash-CAN-100P-340 |
| Starterkit Adapter | ADA-91270-90340-100PFV |
MB91F272WPFV - DEBUGGER and EMULATOR
| Monitor Debugger | Accemic-MDE |
| EVA-Chip EVA-Chip | MB91V280CR-ES |
| Emulation Main Unit | MB2198-01 |
| Emulation Pod/Adapter | MB2198-130-E |
| Probe Cable | MB2198-129 |
| Socket | NQPACK100SD-ND, HQPACK100SD |
| Accessory Kit | ACCESSORIES32 |
| Starterkit | Flash-CAN-100P-340 |
| Starterkit Adapter | ADA-91270-90340-100PFV |
MB91F272WPFV - (FLASH-)ROM PROGRAMMING TOOLS
| Name | Type | Adapter |
| FLASH_PROGRAMMER_FR_FJ | serial (async) |
MB91F272WPFV - SOFTWARE EXAMPLES
The following software is for demonstration purposes only. It is not fully tested, nor validated in order to fulfill its task under all circumstances. Therefore, this software or any part of it must only be used in an evaluation laboratory environment.
| This is a template project | 91270_template-v12.zip |
| This example displays the voltage supplied to AN1 on Port0 (LEDs) and on the UART0 | 91270_ad_uart-v11.zip |
| This sample uses CAN and UART2 | 91270_can-v11.zip |
| This is a demo project for the Flash-Can-100P-340 evaluation board. | 91270_flashcan100p340-v13.zip |
| This sample uses the LEDs as a counter | 91270_io-v11.zip |
| This example uses UART0 | 91270_uart0_async-v11.zip |
| This example uses UART1 | 91270_uart1_async-v11.zip |
| This example uses UART2 | 91270_uart2_async-v11.zip |
| This uses UART3 as LIN master | 91270_uart_lin_master-v11.zip |
All software examples
MB91F272WPFV - APPLICATION NOTES
Please find a selection of Application Notes here or check the complete overview:
| This application note describes the main differences between the MB90340 Series and the MB91270 Series to enable a smooth transition between the Series. | mcu-an-300006-e-v14 |
All application notes
