MB91230 Series : MB91F233LPFF
- Product Features
- Documentation
- Starterkits
- Debugger and Emulator
- (FLASH-)ROM Programming Tools
- Software Examples
- Application Notes
SERIES KEY FEATURES
LCD (4x32)
DESCRIPTION
The MB91F233 and MB91F233L MCUs incorporate embedded LCD controllers and are designed for use in mobile devices and digital consumer electronics with 32-bit CPU power.
BLOCK DIAGRAM
MB91F233LPFF - PRODUCT FEATURES
| CPU [Bits] | 32 |
| Package | FPT-120P-M05 |
| Pincount | 120 |
| Flash memory | 256.00 KByte |
| RAM (code & data) | 16.00 KByte |
| VCC min | 3.00 V |
| VCC max | 3.60 V |
| Min. Temperature | -40 °C |
| Max. Temperature | 85 °C |
| Max. CPU frequency | 33.60 MHz |
| DMA channels | 5 |
| Max. I/Os | 96 |
| A/D Converter | 1 |
| A/D channels | 8 |
| A/D resolution | 10 bit |
| DAC channels | 2 |
| DAC resolution | 8 bit |
| LCD | 128 |
| UART | 4 |
| Pulse Width Modulator (PWM) | 6 |
| Output Compare Unit (OCU) | 4 |
| Input Capture Unit (ICU) | 2 |
| IOTimer | 2 |
| Pulse Width Counter (PWC) | 2 |
| Reload Timer | 4 |
| Up/Down Counter | 2 |
| Timebase Timer (TBT) | 1 |
| Real Time Clock (RTC) | yes |
| Watchdog | 1 |
| External IRQ | 16 |
MB91F233LPFF - DOCUMENTATION
| Datasheet | ds91230-ds07-16506-2e.pdf |
| Hardware Manual | hm91230-cm71-10118-1e.pdf |
| Package datasheet | fpt-120p-m05.pdf |
| Instruction Manual | progfr-cm71-00101-5e.pdf |
MB91F233LPFF - STARTERKITS
| Starterkit | StarterkitMB91230 |
MB91F233LPFF - DEBUGGER and EMULATOR
| EVA-Chip EVA-Chip | MB90V230CR-ES |
| Emulation Main Unit | MB2198-01 |
| Emulation Pod/Adapter | MB2198-130-E |
| Probe Cable | MB2198-121 |
| Socket | NQPACK120SE, HQPACK120SE |
| Accessory Kit | ACCESSORIES32 |
| Starterkit | StarterkitMB91230 |
MB91F233LPFF - (FLASH-)ROM PROGRAMMING TOOLS
| Name | Type | Adapter |
| FLASH_PROGRAMMER_FR_FJ | serial (async) | |
| MINATO | parallel | MF-13-1330 |
| ANDO | parallel | TEF110-233F020AP |
MB91F233LPFF - SOFTWARE EXAMPLES
The following software is for demonstration purposes only. It is not fully tested, nor validated in order to fulfill its task under all circumstances. Therefore, this software or any part of it must only be used in an evaluation laboratory environment.
| This is a project template for the MB91230 Series. | 91230_template-v12.zip |
| This project initializes ADC0. Channel 0, Single-mode, acivation by software. The result is output via UART0 (9600bd, 8N1). | 91230_adc-v10.zip |
| This project initializes the 16-bit Free Running Timer 0 and OCU ch.0/1. | 91230_frt_ocu_1-v10.zip |
| This project initializes the 16-bit Free Running Timer 0 and OCU ch.0/1. | 91230_frt_ocu_2-v10.zip |
| This project initializes Port 1 as output. When using the Starterkit91230 the LEDs are driven. | 91230_io-v10.zip |
| The PPG project initializes PPG ch0 in PWM mode, activated by Software trigger, IRQ enabled. | 91230_ppg_irq-v10.zip |
| All 4 Reload Timers are initialized. Interrupts enabled, reload mode, start by software trigger. | 91230_rlt_irq-v10.zip |
| This project initializes UART0, asynchronous (Mode0), 9600bd, 8N1, LSB first. | 91230_uart0_async-v10.zip |
| This project initializes UART1, asynchronous (Mode0), 9600bd, 8N1, LSB first. | 91230_uart1_async-v10.zip |
All software examples
MB91F233LPFF - APPLICATION NOTES
Please find a selection of Application Notes here or check the complete overview:
| This application note gives a rough overview about how LCD displays work and illuminates different methods to control a LCD by a microcontroller. | mcu-an-300001-e-v13 |
All application notes
