MB91109 Series : MB91F109PF
Product number changed
|
|
- Product Features
- Documentation
- Starterkits
- Debugger and Emulator
- (FLASH-)ROM Programming Tools
- Software Examples
- Application Notes
SERIES KEY FEATURES
Flash
DESCRIPTION
The MB91F109 is a standard single-chip microcontroller using a 32-bit RISC CPU (FR30 series) as its core. It contains various I/O resources and bus control mechanisms for embedded control applications that require high-speed CPU processing. This microcontroller contains 254-kilobyte flash ROM and 4-kilobyte RAM. It has optimal specifications for embedding applications such as navigation systems, high-performance facsimiles, and printer controls, which require high CPU processing power.
BLOCK DIAGRAM
MB91F109PF - PRODUCT FEATURES
| CPU [Bits] | 32 |
| Package | FPT-100P-M06 |
| Pincount | 100 |
| Flash memory | 254.00 KByte |
| RAM (code & data) | 2.00 KByte |
| Data RAM | 2.00 KByte |
| VCC min | 3.15 V |
| VCC max | 3.60 V |
| Min. Temperature | 0 °C |
| Max. Temperature | 70 °C |
| Max. CPU frequency | 25.00 MHz |
| Max. I/Os | 78 |
| A/D Converter | 1 |
| A/D channels | 4 |
| A/D resolution | 10 bit |
| UART | 3 |
| Pulse Width Modulator (PWM) | 4 |
| Reload Timer | 3 |
| Watchdog | 1 |
| External Bus | yes |
| External Bus mode | Non-Multiplexed |
| DRAM Interface | yes |
| Chip-Selects | 6 |
| External IRQ | 4 |
MB91F109PF - DOCUMENTATION
| Datasheet | ds91109-ds07-16304-2e.pdf |
| Hardware Manual | hm91109-cm71-10106-1e.pdf |
| Hardware Manual Correction | hm91109-cm-71-10106-1e-corr-x1-01.pdf |
| Package datasheet | fpt-100p-m06.pdf |
| Instruction Manual | progfr-cm71-00101-5e.pdf |
MB91F109PF - STARTERKITS
| Starterkit | StarterkitMB91100 |
MB91F109PF - DEBUGGER and EMULATOR
| EVA-Chip EVA-Chip | MB91V101ACR-ES |
| Emulation Main Unit | MB2197-01 |
| DSU Cable | MB2197-10 |
| Emulation Pod/Adapter | FR-RAM-STACK-3V-100P-M06 |
| Probe Cable | 0 |
| Socket | IC149-100-014-B5,IC149-100-114-B5,IC149-100-014-S5,IC149-100-114-S5 |
| Accessory Kit | ACCESSORIES32 |
| Starterkit | StarterkitMB91100 |
| Power Supply Unit for Starterkit | PSU_SNG12-24W |
MB91F109PF - (FLASH-)ROM PROGRAMMING TOOLS
| Name | Type | Adapter |
| FLASH_PROGRAMMER_FR_FJ | serial (async) | |
| CONITEC GALEP | parallel | Conitec 210875 |
MB91F109PF - SOFTWARE EXAMPLES
The following software is for demonstration purposes only. It is not fully tested, nor validated in order to fulfill its task under all circumstances. Therefore, this software or any part of it must only be used in an evaluation laboratory environment.
| This is a project template for the MB91100 Series. | 91109_template-v11.zip |
| The ADC runs in Single-mode and is triggered by software, every time the AD conversion is completed. | 91109_adc-v11.zip |
| This sample initializes the DMAC and copys some data from an internal RAM address to another one. | 91109_dma_mem2mem-v11.zip |
| This example performs a simple memory test for an external SRAM located at 0x400000-0x4FFFFF. | 91109_extbus_sw_memorytest-v10.zip |
| This sample initializes one port as output and writes start data to the port. | 91109_io-v11.zip |
| Example project to be used with the Softune Workbench Monitor debugger. | 91109_mondeb_startup-v12.zip |
| Two Reload Timers toggle a port at different frequencies. They are triggered by software. | 91109_rlt_irq_1-v11.zip |
| This demo initializes the 16-bit Reload Timer and increments a counter once a second by using the Timer interrupt. | 91109_rlt_irq_2-v10.zip |
| This sample uses the UART0 and UART1 of the MB91109 to write characters to a terminal program. | 91109_starterkitmb91100-v11.zip |
| This samples shows how certain modes can be linked on specific addresses. | 91109_sw_pragmasection-v11.zip |
| This sample uses the UART0 of the MB91109 to write characters to a terminal program. | 91109_uart0_async-v11.zip |
| This sample shows how to set up the UART0 in synchronous mode. | 91109_uart0_sync-v11.zip |
All software examples
MB91F109PF - APPLICATION NOTES
Please find a selection of Application Notes here or check the complete overview:
| This application note explains how to program the internal Flash memory of the MB91F109 with Fujitsu Flash programming tool. | mcu-an-391018-e-v10 |
| This appnote for the FR50 Family gives hints to optimize the EMI performance. | mcu-an-391021-e-v12 |
| This application note describes how the customize build can be used to add in necessary tools into the Softune Workbench development environment. | mcu-an-391029-e-v11 |
| This application note describes the setup and using of a third party Flash programmer, CONITEC's GALEP-4 | mcu-an-300004-e-v11 |
| This application note provides some information and recommendations how to connect external crystals or resonators to Fujitsu microcontrollers. In order to achieve a proper and stable clock oscillation the composition of external circuits, PCB layout design and the microcontroller must be taken into account and evaluated carefully | mcu-an-300007-e-v13 |
| This application note describes the setup and using of a third party Flash programmer, CONITEC's GALEP-5 | mcu-an-300022-e-v14 |
| This Application Note describes how to setup the Softune Workbench to automatically start the debugger at start. | mcu-an-300097-e-v11 |
All application notes
