MB91101 Series : MB91101APF
Product number changed
|
|
- Product Features
- Documentation
- Starterkits
- Debugger and Emulator
- Software Examples
- Application Notes
SERIES KEY FEATURES
Low cost
DESCRIPTION
The MB91101 is a standard single-chip microcontroller constructed around the 32-bit RISC CPU (FR* family) core with abundant I/O resources and bus control functions optimized for high-performance/high-speed CPU processing for embedded controller applications. To support the vast memory space accessed by the 32-bit CPU, the MB91101 normally operates in the external bus access mode and executes instructions on the internal 1 Kbyte cache memory and 2 Kbytes RAM for enhanced performance.
The MB91101 is optimized for applications requiring high-performance CPU processing such as navigation systems, high-performance FAXs and printer controllers.
BLOCK DIAGRAM
MB91101APF - PRODUCT FEATURES
| CPU [Bits] | 32 |
| Package | FPT-100P-M06 |
| Pincount | 100 |
| RAM (code & data) | 2.00 KByte |
| Data RAM | 2.00 KByte |
| Instruction Cache | 1.00 KByte |
| VCC min | 2.70 V |
| VCC max | 5.50 V |
| Min. Temperature | 0 °C |
| Max. Temperature | 70 °C |
| Max. CPU frequency | 50.00 MHz |
| Max. I/Os | 50 |
| A/D Converter | 1 |
| A/D channels | 8 |
| A/D resolution | 10 bit |
| UART | 3 |
| Pulse Width Modulator (PWM) | 4 |
| Reload Timer | 3 |
| Timebase Timer (TBT) | 1 |
| Watchdog | 1 |
| External Bus | yes |
| External Bus mode | Non-Multiplexed |
| DRAM Interface | yes |
| Chip-Selects | 6 |
| External IRQ | 4 |
MB91101APF - DOCUMENTATION
| Datasheet | ds91101a-ds07-16301-5e.pdf |
| Hardware Manual | hm91101-cm71-10102-2e.pdf |
| Hardware Manual Correction | hm91101-cm71-10102-2et1.pdf |
| Package datasheet | fpt-100p-m06.pdf |
| Instruction Manual | progfr-cm71-00101-5e.pdf |
MB91101APF - STARTERKITS
| Starterkit | StarterkitMB91100 |
MB91101APF - DEBUGGER and EMULATOR
| EVA-Chip EVA-Chip | MB91V101ACR-ES |
| Emulation Main Unit | MB2197-01 |
| DSU Cable | MB2197-10 |
| Emulation Pod/Adapter | FR-RAM-STACK1-100P-M06 (5V version) |
| Probe Cable | 0 |
| Socket | IC149-100-014-B5,IC149-100-114-B5,IC149-100-014-S5,IC149-100-114-S5 |
| Accessory Kit | ACCESSORIES32 |
| Starterkit | StarterkitMB91100 |
| Power Supply Unit for Starterkit | PSU_SNG12-24W |
| EVA-Chip EVA-Chip | MB91V101ACR-ES |
| Emulation Main Unit | MB2197-01 |
| DSU Cable | MB2197-10 |
| Emulation Pod/Adapter | FR-RAM-STACK-3V-100P-M06 (3V version) |
| Probe Cable | 0 |
| Socket | IC149-100-014-B5,IC149-100-114-B5,IC149-100-014-S5,IC149-100-114-S5 |
| Accessory Kit | ACCESSORIES32 |
| Starterkit | StarterkitMB91100 |
MB91101APF - SOFTWARE EXAMPLES
The following software is for demonstration purposes only. It is not fully tested, nor validated in order to fulfill its task under all circumstances. Therefore, this software or any part of it must only be used in an evaluation laboratory environment.
| This is a project template for the MB91100 Series. | 91101_template-v11.zip |
| MB91101 FR30 Evaluation Board demonstration program | 91101_fr30-v10.zip |
| This sample initializes one port as output and writes start data to the port. | 91101_io-v11.zip |
| This example shows how to drive an LCD Module (HD44780 or eq.) connected to Port F. | 91101_lcd_alpha-v10.zip |
| This example shows how to connect a standard LCD module to the MB91101 (FR30 Starterkit). | 91101_lcd_seg-v10.zip |
| This project uses RLT0 and 1 interrupt service routine to toggle a port. | 91101_rlt_irq_1-v11.zip |
| This demo initializes the 16-bit Reload Timer and increments a counter once a second by using the Timer interrupt. | 91101_rlt_irq_2-v10.zip |
| This example shows how to use a 16-Bit timer to drive a simple second counter. | 91101_rlt_irq_3-v10.zip |
| Demo Program for the Workbench simulator. | 91101_sw_simulator_1-v10.zip |
| A demo project which shows how to use the simulator. | 91101_sw_simulator_2-v10.zip |
| This sample uses the UART0 to write characters to a terminal program. | 91101_uart_async-v11.zip |
All software examples
MB91101APF - APPLICATION NOTES
Please find a selection of Application Notes here or check the complete overview:
| This application note shows how to interface an MB91101 (FR30 device) with an external Flash memory. | mcu-an-391015-e-v11 |
| This appnote for the FR50 Family gives hints to optimize the EMI performance. | mcu-an-391021-e-v12 |
| This application note describes how the customize build can be used to add in necessary tools into the Softune Workbench development environment. | mcu-an-391029-e-v11 |
| This appnote describes the versatile debug features of the MB2197-01 emulator system. | mcu-an-391012-e-v13 |
| This Application Note describes how to setup the Softune Workbench to automatically start the debugger at start. | mcu-an-300097-e-v11 |
All application notes
