MB90460 Series : MB90F462APFM
- Product Features
- Documentation
- Starterkits
- Debugger and Emulator
- (FLASH-)ROM Programming Tools
- Software Examples
- Application Notes
SERIES KEY FEATURES
Inverter PWM
DESCRIPTION
The MB90460 series is a line of general-purpose, Fujitsu 16-bit microcontrollers designed for process control applications which require high-speed real-time processing, such as consumer products. While inheriting the AT architecture of the F²MC(*) family, the instruction set for the F²MC-16LX CPU core of the MB90460 series incorporates additional instructions for high-level languages, supports extended addressing modes, and contains enhanced multiplication and division instructions as well as a substantial collection of improved bit manipulation instructions. In addition, the MB90460 has an on-chip 32-bit accumulator which enables processing of long-word data. The peripheral resources integrated in the MB90460 series include: an 8/10-bit A/D converter, UARTs (SCI) 0 to 1, 16-bit PPG timer, multi-functional timer (16-bit free-run timer, input capture units (ICUs) 0 to 3, output compare units (OCUs) 0 and 5, 16-bit PPG timer, waveform generator), multi-pulse generator (16-bit PPG timer, 16-bit reload timer, waveform sequencer), PWC 0 to 1, 16-bit reload timer and DTP/external interrupt.
BLOCK DIAGRAM
MB90F462APFM - PRODUCT FEATURES
| CPU [Bits] | 16 |
| Package | FPT-64P-M09 |
| Pincount | 64 |
| Flash memory | 64.00 KByte |
| Flash Security (read protection) | yes |
| RAM (code & data) | 2.00 KByte |
| VCC min | 4.50 V |
| VCC max | 5.50 V |
| Min. Temperature | -40 °C |
| Max. Temperature | 85 °C |
| Max. CPU frequency | 16.00 MHz |
| Max. I/Os | 51 |
| A/D Converter | 1 |
| A/D channels | 8 |
| A/D resolution | 10 bit |
| UART | 2 |
| Pulse Width Modulator (PWM) | 3 |
| Output Compare Unit (OCU) | 6 |
| Input Capture Unit (ICU) | 4 |
| Waveform Generator (WFG) | 1 |
| IOTimer | 1 |
| Pulse Width Counter (PWC) | 2 |
| Reload Timer | 2 |
| Timebase Timer (TBT) | 1 |
| Watchdog | 1 |
| External IRQ | 8 |
MB90F462APFM - DOCUMENTATION
| Datasheet | ds90460-ds07-13714-2e.pdf |
| Hardware Manual | hm90460-cm44-10120-4e.pdf |
| Hardware Manual Correction | hm90460-cm44-10120-4et2.pdf |
| Package datasheet | fpt-64p-m09.pdf |
| Programming Manual | prog16lx-cm44-00201-3e.pdf |
MB90F462APFM - STARTERKITS
| Starterkit | Flash-CAN-64P-M09-V2 |
MB90F462APFM - DEBUGGER and EMULATOR
| Monitor Debugger | Accemic-MDE |
| EVA-Chip EVA-Chip | MB90V460CR-ES |
| Emulation Main Unit | MB2147-01-E |
| Emulation Pod/Adapter | MB2147-10 |
| Probe Cable | MB2147-461 |
| Socket | NQPACK64SB, HQPACK64SB140 |
| Accessory Kit | ACCESSORIES16 |
| Starterkit | Flash-CAN-64P-M09-V2 |
| Power Supply Unit for Starterkit | PSU_SNG12-24W |
MB90F462APFM - (FLASH-)ROM PROGRAMMING TOOLS
| Name | Type | Adapter |
| FLASH_PROGRAMMER_16LX | serial (async) | |
| CONITEC GALEP | serial | Conitec 210865/210915 |
| FUJITSU FLASHKIT | serial (async/sync) |
MB90F462APFM - SOFTWARE EXAMPLES
The following software is for demonstration purposes only. It is not fully tested, nor validated in order to fulfill its task under all circumstances. Therefore, this software or any part of it must only be used in an evaluation laboratory environment.
| Project template for the MB90460 Series | 90460_template-v13.zip |
| The Free Running Timer is reset by an Input Capture event. | 90460_frt_icu-v10.zip |
| This example initializes the Output Compare Units 0-5 and the 16-bit Free Running Counter. | 90460_frt_ocu-v10.zip |
| This project simply counts down an internal variable and puts its value to port0. | 90460_io-v10.zip |
| LEDs on port 0 (e.g. on FLASH-CAN-64P-M09-V2) are toggled at each int0 detection. | 90460_irq_ext-v10.zip |
| This project initializes PPG channels 0-2 and generates a rectangular waveform. | 90460_ppg-v10.zip |
| Interrupts of Reload Timer 0 and 1 toggle LEDs on port0 | 90460_rlt_irq-v10.zip |
| This example initializes UART0 and puts out a welcome string. Then it echoes every received character. | 90460_uart0_async-v10.zip |
| This example initializes UART1 and puts out a welcome string. Then it echoes every received character. | 90460_uart1_async-v10.zip |
All software examples
MB90F462APFM - APPLICATION NOTES
Please find a selection of Application Notes here or check the complete overview:
| This is a short documentation to give an introduction how to start a project with the Softune Workbench. | mcu-an-390025-e-v23 |
| This application note explains the different possibilities to program the Flash MCUs. | mcu-an-390031-e-v26 |
| This application note describes the commands which are supported by the BiROM of the 16LX Flash MCUs in order to generate an own programming environment. | mcu-an-390027-e-v28 |
| This application note roughly shows the necessary steps for transition to standby-mode and wake-up for 16LX Family MCUs. | mcu-an-390058-e-v21 |
| How to set up a hardware environment for 16LX Family MCUs. | mcu-an-390098-e-v20 |
| This appnote for the 16LX Family gives hints to optimize the EMI performance. | mcu-an-390053-e-v14 |
| This application note gives a rough overview about the embedded A/D converter used within the 16LX Series and reflects the different modes that can be used. | mcu-an-390084-e-v14 Attachment |
| This installation guide will help you to quickly start setting up the MB2147-01 emulation hardware for Fujitsu 16-bit MCUs. | mcu-an-390070-e-v29 |
| First steps how to use the Emulator MB2147-01 together with the Softune Workbench V30L28 or higher using an evaluation MCU with its Starter Kit. | mcu-an-390069-e-v13 |
| This document describes the debugging methods of a MB90V340 system together with a FLASH-CAN-100P-340 target board. | mcu-an-390083-e-v20 |
| Recommendation for MODE-Pins in case of external noise | mcu-an-390093-e-v16 |
| This application note provides some information and recommendations how to connect external crystals or resonators to Fujitsu microcontrollers. In order to achieve a proper and stable clock oscillation the composition of external circuits, PCB layout design and the microcontroller must be taken into account and evaluated carefully | mcu-an-300007-e-v13 |
| This application note describes the setup and using of a third party Flash programmer, CONITEC's GALEP-5 | mcu-an-300022-e-v14 |
| This application note describes how to use the Fujitsu’s Softune with EasyCode | mcu-an-300038-e-v10 |
| This Application Note describes how to setup the Softune Workbench to automatically start the debugger at start. | mcu-an-300097-e-v11 |
All application notes
