MB90335 Series : MB90F337APFM
- Product Features
- Documentation
- Debugger and Emulator
- (FLASH-)ROM Programming Tools
- Software Examples
- Application Notes
SERIES KEY FEATURES
USB, Dual Operation Flash
DESCRIPTION
The MB90335 series are 16-bit microcontrollers designed for applications, such as personal computer peripheral devices, that require USB communications. The USB feature supports not only 12-Mbps Function operation but also Mini-HOST operation. It is equipped with functions that are suitable for personal computer peripheral devices such as displays and audio devices, and control of mobile devices that support USB communications. While inheriting the AT architecture of the F2MC* family, the instruction set supports the C language and extended addressing modes and contains enhanced signed multiplication and division instructions as well as a substantial collection of improved bit manipulation instructions. In addition, long word processing is now available by introducing a 32-bit accumulator.
BLOCK DIAGRAM
MB90F337APFM - PRODUCT FEATURES
| CPU [Bits] | 16 |
| Package | FPT-64P-M09 |
| Pincount | 64 |
| Dual Operation Flash | 64.00 KByte |
| RAM (code & data) | 4.00 KByte |
| VCC min | 3.00 V |
| VCC max | 3.60 V |
| Min. Temperature | -40 °C |
| Max. Temperature | 85 °C |
| Max. CPU frequency | 24.00 MHz |
| Max. I/Os | 45 |
| USB | 1 |
| UART | 2 |
| SIO (Serial I/O) | 1 |
| I2C | 1 |
| Programmable Pulse Generator (PPG) | 4 |
| Pulse Width Counter (PWC) | 1 |
| Reload Timer | 1 |
| Timebase Timer (TBT) | 1 |
| Watchdog | 1 |
| External IRQ | 8 |
MB90F337APFM - DOCUMENTATION
| Datasheet | ds90335-ds07-13735-2e.pdf |
| Datasheet Correction | ds90335-ds07-13735-2e-corr-x1-00.pdf |
| Hardware Manual | hm90335-cm44-10137-3e.pdf |
| Hardware Manual Correction | hm90335-cm44-10137-3e-corr-x1-01.pdf |
| Package datasheet | fpt-64p-m09.pdf |
| Programming Manual | prog16lx-cm44-00201-3e.pdf |
MB90F337APFM - DEBUGGER and EMULATOR
| Monitor Debugger | Accemic-MDE |
| EVA-Chip EVA-Chip | MB90V330ACR-ES |
| Emulation Main Unit | MB2147-01 |
| Emulation Pod/Adapter | MB2147-20 |
| Probe Cable | MB2132-493 |
| Socket | NQPACK64SB, HQPACK64SB140 |
| Accessory Kit | ACCESSORIES16 |
MB90F337APFM - (FLASH-)ROM PROGRAMMING TOOLS
| Name | Type | Adapter |
| YOKOGAWA | serial | |
| FUJITSU | serial |
MB90F337APFM - SOFTWARE EXAMPLES
The following software is for demonstration purposes only. It is not fully tested, nor validated in order to fulfill its task under all circumstances. Therefore, this software or any part of it must only be used in an evaluation laboratory environment.
MB90F337APFM - APPLICATION NOTES
Please find a selection of Application Notes here or check the complete overview:
| This is a short documentation to give an introduction how to start a project with the Softune Workbench. | mcu-an-390025-e-v23 |
| This application note explains the different possibilities to program the Flash MCUs. | mcu-an-390031-e-v26 |
| This application note describes the commands which are supported by the BiROM of the 16LX Flash MCUs in order to generate an own programming environment. | mcu-an-390027-e-v28 |
| This application note roughly shows the necessary steps for transition to standby-mode and wake-up for 16LX Family MCUs. | mcu-an-390058-e-v21 |
| How to set up a hardware environment for 16LX Family MCUs. | mcu-an-390098-e-v20 |
| This appnote for the 16LX Family gives hints to optimize the EMI performance. | mcu-an-390053-e-v14 |
| This application note gives a rough overview about the embedded A/D converter used within the 16LX Series and reflects the different modes that can be used. | mcu-an-390084-e-v14 Attachment |
| This installation guide will help you to quickly start setting up the MB2147-01 emulation hardware for Fujitsu 16-bit MCUs. | mcu-an-390070-e-v29 |
| First steps how to use the Emulator MB2147-01 together with the Softune Workbench V30L28 or higher using an evaluation MCU with its Starter Kit. | mcu-an-390069-e-v13 |
| This document describes the debugging methods of a MB90V340 system together with a FLASH-CAN-100P-340 target board. | mcu-an-390083-e-v20 |
| Recommendation for MODE-Pins in case of external noise | mcu-an-390093-e-v16 |
| This appnote shows how to use the dual operation Flash memory in the MB90F897. | mcu-an-390091-e-v12 |
| How to implement an in-circuit EEPROM emulation with the dual-operation Flash in the MB90F897. | mcu-an-390094-e-v12 Attachment |
All application notes
