MB90330 Series : MB90F334APMC
Product number changed
|
|
- Product Features
- Documentation
- Debugger and Emulator
- (FLASH-)ROM Programming Tools
- Software Examples
- Application Notes
SERIES KEY FEATURES
USB, 16ch ADC
DESCRIPTION
The MB90330 series are 16-bit microcontrollers designed for applications, such as personal computer peripheral devices, that require USB communications. The USB feature supports not only 12-Mbps Function operation but also MiniHost operation. It is equipped with functions that are suitable for personal computer peripheral devices such as displays and audio devices, and control of mobile devices that support USB communications. While inheriting the AT architecture of the F2MC* family, the instruction set supports the C language and extended addressing modes and contains enhanced signed multiplication and division instructions as well as a substantial collection of improved bit manipulation instructions. In addition, long word processing is now available by introducing a 32-bit accumulator.
BLOCK DIAGRAM
MB90F334APMC - PRODUCT FEATURES
| CPU [Bits] | 16 |
| Package | FPT-120P-M21 |
| Pincount | 120 |
| Flash memory | 384.00 KByte |
| RAM (code & data) | 24.00 KByte |
| VCC min | 3.00 V |
| VCC max | 3.60 V |
| Min. Temperature | -40 °C |
| Max. Temperature | 85 °C |
| Max. CPU frequency | 24.00 MHz |
| Subclock | yes |
| Max. I/Os | 110 |
| A/D Converter | 1 |
| A/D channels | 16 |
| A/D resolution | 10 bit |
| A/D conversion time (min.) | 7.200 µs |
| USB | 1 |
| UART | 4 |
| SIO (Serial I/O) | 1 |
| I2C | 3 |
| Programmable Pulse Generator (PPG) | 6 |
| Output Compare Unit (OCU) | 4 |
| Input Capture Unit (ICU) | 4 |
| IOTimer | 1 |
| Pulse Width Counter (PWC) | 1 |
| Reload Timer | 3 |
| Timebase Timer (TBT) | 1 |
| Clock Timer | 1 |
| Watchdog | 1 |
| External Bus | yes |
| External Bus mode | Non-Multiplexed |
| External IRQ | 8 |
MB90F334APMC - DOCUMENTATION
| Datasheet | ds90330a-ds07-13734-7e.pdf |
| Hardware Manual | hm90330-cm44-10129-6e.pdf |
| Customer Information | standby_cancel_fail_03dec02_finalj2.0e1.0.pdf |
| Customer Information | CI-300022-E-V10-MB90330A_USB_Report.pdf |
| Package datasheet | fpt-120p-m21.pdf |
| Programming Manual | prog16lx-cm44-00201-3e.pdf |
| DDI (Specification expansion of USB mini-HOST) | USB-HUB-ISO_customerE_2009-059.pdf |
MB90F334APMC - DEBUGGER and EMULATOR
| Monitor Debugger | Accemic-MDE |
| EVA-Chip EVA-Chip | MB90V330ACR-ES |
| Emulation Main Unit | MB2147-01-E |
| Emulation Pod/Adapter | MB2147-20-E |
| Probe Cable | MB2132-492 |
| Socket | NQPACK120SD, HQPACK120SD |
| Accessory Kit | ACCESSORIES16 |
MB90F334APMC - (FLASH-)ROM PROGRAMMING TOOLS
| Name | Type | Adapter |
| CONITEC GALEP | serial | Conitec 210865/210915 |
| FLASH_PROGRAMMER_16LX | serial (async) |
MB90F334APMC - SOFTWARE EXAMPLES
The following software is for demonstration purposes only. It is not fully tested, nor validated in order to fulfill its task under all circumstances. Therefore, this software or any part of it must only be used in an evaluation laboratory environment.
| This is a project template for the MB90330 Series. | 90330_template-v14.zip |
| This sample uses an Analog - Digital conversion | 90330_adc-v12.zip |
| This sample uses an Analog - Digital conversion and UART0 | 90330_adc_uart_async-v12.zip |
| This is a software example to test the four channels input compare of the 90330 Series (Simple frequency counter) | 90330_frt_icu-v12.zip |
| This is an example of the output compare function. | 90330_frt_ocu-v11.zip |
| The I2C-Interface 0 of the MB90330-Series is used to write and read data from an external EEPROM (24C16) | 90330_i2c_0-v12.zip |
| The I2C-Interface 1 of the MB90330-Series is used to write and read data from an external EEPROM (24C16) | 90330_i2c_1-v12.zip |
| The I2C-Interface 2 of the MB90330-Series is used to write and read data from an external EEPROM (24C16) | 90330_i2c_2-v12.zip |
| This project simply counts an internal variable and outputs the counter value to port0. | 90330_io-v11.zip |
| This project simply shifts a '1' up and down on port0, controlled by INT0 and INT1. | 90330_irq_ext-v12.zip |
| In this example the PPG-timer is set to 16-bit mode. There are three different channels. | 90330_ppg16-v11.zip |
| The channels 0/2/4 of the PPG-timer are used to deliver the count clock for channels 1/3/5. | 90330_ppg88-v11.zip |
| This is a test application to measure the frequency of an input signal on PWC-input pin and send the result to UART0 | 90330_pwc_uart_async-v13.zip |
| This project uses interrupts of reload-timers 0-2 to toggle LEDs (Port0). | 90330_rlt_irq-v11.zip |
| In this example the Timebase Timer is used to generate an interrupt every overrun. | 90330_tbt_irq-v11.zip |
| This is a test application to send a welcome string via UART0. | 90330_uart0_async-v14.zip |
| This is a test application to send a welcome string via UART0. | 90330_uart0_async_irq-v13.zip |
| This is a test application to send a welcome string via UART1. | 90330_uart1_async-v13.zip |
| This is a test application to send a welcome string via UART2. | 90330_uart2_async-v13.zip |
| This is a test application to send a welcome string via UART3. | 90330_uart3_async-v13.zip |
| This project is a demonstration of the Watchdog Timer | 90330_wdt-v11.zip |
All software examples
MB90F334APMC - APPLICATION NOTES
Please find a selection of Application Notes here or check the complete overview:
| This is a short documentation to give an introduction how to start a project with the Softune Workbench. | mcu-an-390025-e-v23 |
| This application note explains the different possibilities to program the Flash MCUs. | mcu-an-390031-e-v26 |
| This application note describes the commands which are supported by the BiROM of the 16LX Flash MCUs in order to generate an own programming environment. | mcu-an-390027-e-v28 |
| This application note roughly shows the necessary steps for transition to standby-mode and wake-up for 16LX Family MCUs. | mcu-an-390058-e-v21 |
| How to set up a hardware environment for 16LX Family MCUs. | mcu-an-390098-e-v20 |
| This appnote for the 16LX Family gives hints to optimize the EMI performance. | mcu-an-390053-e-v14 |
| This application note gives a rough overview about the embedded A/D converter used within the 16LX Series and reflects the different modes that can be used. | mcu-an-390084-e-v14 Attachment |
| This installation guide will help you to quickly start setting up the MB2147-01 emulation hardware for Fujitsu 16-bit MCUs. | mcu-an-390070-e-v29 |
| First steps how to use the Emulator MB2147-01 together with the Softune Workbench V30L28 or higher using an evaluation MCU with its Starter Kit. | mcu-an-390069-e-v13 |
| This document describes the debugging methods of a MB90V340 system together with a FLASH-CAN-100P-340 target board. | mcu-an-390083-e-v20 |
| Recommendation for MODE-Pins in case of external noise | mcu-an-390093-e-v16 |
| This application note reflects the external bus interface that can be found on some devices of the 16LX Series. | mcu-an-390034-e-v19 Attachment |
| This application note describes the most common SPI formats and how to implement them on Fujitsu 16-bit MCUs. | mcu-an-300002-e-v12 |
| This application note provides some information and recommendations how to connect external crystals or resonators to Fujitsu microcontrollers. In order to achieve a proper and stable clock oscillation the composition of external circuits, PCB layout design and the microcontroller must be taken into account and evaluated carefully | mcu-an-300007-e-v13 |
| This application note shows some possibilies to drive a BLDC motor with different MCUs using a single PPG. | mcu-an-300020-e-v10 Attachment |
| This application note describes the setup and using of a third party Flash programmer, CONITEC's GALEP-5 | mcu-an-300022-e-v14 |
| This application note describes how to use the Fujitsu’s Softune with EasyCode | mcu-an-300038-e-v10 |
| This Application Note describes how to setup the Softune Workbench to automatically start the debugger at start. | mcu-an-300097-e-v11 |
All application notes
