Europe, Middle East and Africa
- Home
- > Services & Products
- > Semiconductor
- > Microcontrollers
- > 8-bit
- > MB89F202PFV
MB89202 Series : MB89F202PFV
Not recommended for new designs |
|
- Product Features
- Documentation
- Starterkits
- Debugger and Emulator
- (FLASH-)ROM Programming Tools
- Software Examples
- Application Notes
SERIES KEY FEATURES
ADC, Flash
DESCRIPTION
The MB89202 series is a line of single-chip microcontrollers. In addition to a compact instruction set, the microcontrollers contain a variety of peripheral functions such, timers, a serial interface, an A/D converter and an external interrupt.
BLOCK DIAGRAM
MB89F202PFV - PRODUCT FEATURES
| CPU [Bits] | 8 |
| Package | FPT-34P-M03 |
| Pincount | 34 |
| Flash memory | 16.00 KByte |
| Flash Security (read protection) | yes |
| RAM (code & data) | 0.50 KByte |
| VCC min | 3.50 V |
| VCC max | 5.50 V |
| Min. Temperature | -40 °C |
| Max. Temperature | 85 °C |
| Max. CPU frequency | 12.50 MHz |
| Max. I/Os | 27 |
| A/D Converter | 1 |
| A/D channels | 8 |
| A/D resolution | 10 bit |
| UART | 1 |
| SIO (Serial I/O) | 1 |
| Programmable Pulse Generator (PPG) | 1 |
| Pulse Width Modulator (PWM) | 1 |
| Timer Counter | 1 |
| Timebase Timer (TBT) | 1 |
| Watchdog | 1 |
| External IRQ | 11 |
MB89F202PFV - DOCUMENTATION
| Datasheet | ds89202-ds07-12561-2e.pdf |
| Hardware Manual | hm89202-cm25-10153-2e.pdf |
| Package datasheet | fpt-34p-m03.pdf |
| Programming Manual | softm8l-cm25-00101-3e.pdf |
MB89F202PFV - STARTERKITS
| Starterkit | FMPDC-MB89V201-ADPB = MB2144-230 with mounted MB89V201PFV-ES |
MB89F202PFV - DEBUGGER and EMULATOR
| EVA-Chip EVA-Chip | MB89V201PFV-ES |
| Emulation Main Unit | MSE1001C |
| Accessory Kit | ACCESSORIES16 |
| Starterkit | FMPDC-MB89V201-ADPB = MB2144-230 with mounted MB89V201PFV-ES |
MB89F202PFV - (FLASH-)ROM PROGRAMMING TOOLS
| Name | Type | Adapter |
| AF9723 + AF9834 | parallel | TEF200-89F202-PFV |
| AF9709/B | parallel | TEF200-89F202-PFV |
| AF9708 | parallel | TEF200-89F202-PFV |
| FUJITSU PC PROGRAMMER | serial | ROM3-FPT34PM03-8L |
MB89F202PFV - SOFTWARE EXAMPLES
The following software is for demonstration purposes only. It is not fully tested, nor validated in order to fulfill its task under all circumstances. Therefore, this software or any part of it must only be used in an evaluation laboratory environment.
Use only the template-project as starting point for your application. Only the template-project will be updated in case of any change of the header files, startup code etc.!
| Device specific Software Examples | |
| This is a project template for the MB89201 Series. | 89201_template-v10.zip |
| Port0 is a binary counter. If you connect some LEDs to this port, you can see the counter function as a lighting of the LEDs. | 89201_io-v10.zip |
| Port0 is a hexadezimal counter. If you connect a 7-segment display to this port, you can see the counter function. | 89201_io_7seg_counter-v10.zip |
| This is a test application which sends a welcome string to the UART and echoes every received character. | 89201_uart_async-v10.zip |
All software examples
APPLICATION NOTES
Please find a selection of Application Notes here or check the complete overview:
| This appnote for the 8L Family gives hints to optimize the EMI performance. | mcu-an-389024-e-v11 |
| This application note describes how to start development with the 8L Family MB89201 Series. | mcu-an-300000-e-v11 |
| This application note describes the programming of the MB89F201 Series Flash device MB89F202. | mcu-an-300011-e-v11 |
| This application note provides some information and recommendations how to connect external crystals or resonators to Fujitsu microcontrollers. In order to achieve a proper and stable clock oscillation the composition of external circuits, PCB layout design and the microcontroller must be taken into account and evaluated carefully | mcu-an-300007-e-v13 |
| This Application Note describes how to setup the Softune Workbench to automatically start the debugger at start. | mcu-an-300097-e-v11 |
All application notes